CTL is currently undergoing changes, and some tools on this page are under maintenance. We appreciate your patience during this transition. If you need immediate support, please submit a consult request here.

WeVideo Power Tips: Monitoring Decibel Levels
A little intro to audio monitoring in Wevideo.
Handling audio levels properly will depend greatly on the software we use for editing. WeVideo has a very simplified audio control set up which only addresses about half of what we can use to create well crafted audio that will ensure your listeners have a comfortable and engaging listening experience. Simply put, WeVideo’s capabilities would be greatly increased by including a reliable and accurate visual interface to visually show you exactly what the decibel levels are like most other editing software packages do.
If you have a good grasp on what your media levels are to begin with and have an experience ear when mixing audio, then this gap may not be as problematic but for everyone else who wants more assurance, there is a handy work-around. We can use a free and highly effective software called OBS to fill in the gaps using a decibel meter to visually show us actual decibel levels. OBS stands for Open Broadcast Software; it’s highly recommended and widely used across the media industry. It’s trusted and we can use its default settings right away to give us a tremendous advantage over using Wevideo alone. So, until WeVideo develops a built-in decibel meter, OBS will do the trick.
Setting up OBS to monitor audio levels
OBS studio is a free software available on their website https://obsproject.com/download . It works on PC, Mac and Linux systems. This program can display the actual decibel levels of a file itself so you can know how loud something actually is. In its main interface, it shows what is called a VU decibel bar meter which can be adjusted to measure the levels in WeVideo as we play through a video.

After downloading the software, open it. You can go to WeVideo before or after installing. Go to a Wevideo project that you are working on and load up a sequence in the editor so you can play it. When OBS opens it should look like this screen shot in the default settings.
OBS can be used for a lot of things which is why there are so many separate windows. Here we’re interested in the one that says Audio Mixer in the middle on the bottom half of OBS. Hit play on WeVideo and notice the colored bars on the decibel meter flicker back and forth. In OBS we can view this meter horizontally or vertically. This horizontal view is not as helpful unless you’re already very familiar with VU meters. A vertical view more clearly demonstrates the idea of levels increasing or decreasing. So, let’s make this meter vertical and really big. Simply click on where it says Audio Mixer in OBS and drag it outside of the OBS user interface window. The top of the break away window will turn light color and now you can drop it. Now, click on the three dots menu next to the gears on the lower left corner and select “vertical layout”. Click on the bottom edge of its window and drag it down to enlarge the meter as big as you want. We will be paying close attention to areas between -20 and 0 so make sure you can see those well. Notice there is a slider and a blue line on the left of the decibel scale and colored bars. It’s a volume slider for adjusting playback volume in OBS. Leave it at the top and do not touch it. We want OBS to display the decibels as they actually are coming from the file in WeVideo so leave it be at 0. In OBS, this means that the displayed volume is adjusted by 0 – meaning not being modified so leave it be so we can see our actual levels coming from Wevideo. You are only using this decibel meter visually and not adjusting any of its controls.
Reading the meter

How do you read this meter? This decibel meter is a bit like a thermometer. Lower minus numbers are quieter and higher or less negative numbers are louder. The scale goes from 0 to a bit past -60. This meter style is in fact very common in the media industry so it’s good to be familiar with. For your reference, on this style of decibel meter, normal conversational speaking level ranges between -12 and -6 decibels. That’s your sweet spot that we want to reach on this meter for dialogue. Music and sound effects are a different matter and I’ll get to those later. On the scale we see green, yellow and red. The bars change color as they ascend and grow louder. As dialogue plays, the lights will flicker up and down on the scale. Green and yellow are okay with higher yellows being more cautionary. A little red now and then for a brief moment is okay but we want as little as possible over all. For talking, you want to see meter values light up between about – 12 or -18 and -6. It does not have to be too overly exact but you want it in this ball park.
There are two little bars on the meter for left and right audio channels. Most audio you’ll use is in stereo so this meter is designed to show both channels. It’s normal for the left and right levels to be a little different. You will see a tiny colored bar hang out for a while at the top of each channel. That’s normal and is just showing you the level of a most recent high level value. That little mark moves up and down as the maximum levels change and are mainly for reference.
Using the meter to monitor and adjust your Wevideo audio – Important reminders
However you change the levels when you get to adjusting them, you need to know what the original levels are and how those levels will change if you adjust them directly. Again, this is not the loudness level of what you hear in your head phones when you raise or lower the volume on your computer, laptop or other device, you need to target the actual levels of the file itself which are seen on the decibel meter. In short, the decibel meter will show the true levels of the file regardless of how you adjust your device’s volume. This said, you still need a comfortable listening level to monitor what you are doing. So, you can adjust your device volume if necessary but always remember what the decibel meter says is the true loudness level of the file itself. This is why you need to make sure the controls in both WeVideo and OBS are set so you can see and hear the actual, unaltered levels of the original audio itself otherwise the decibel meter will give misleading results.
Using the meter to monitor and adjust your Wevideo audio – Dialogue check
Head back to WeVideo. Next we want to make sure we can see the waveform on the tracks in WeVideo. To do this, click on the three dots menu next to the track name. It will say “track actions” as you hover over it. First make sure that your track height is set to large then “audio & opacity” and select “show audio levels”. That will make the waveform appear. The waveform is super handy and shows you fluctuations in loudness. In WeVideo, make sure the volume is parked at 100% for all tracks you want to test. This means it’s playing the volume at 100% of its original settings. We’re checking dialogue audio so mute all other tracks but the one you are testing.
So now with the controls set in WeVideo and OBS we are ready to play and test levels. The main way to adjust levels in wevideo is the track volume slider. It’s a horizontal slider on the far left of the track. In WeVideo, adjusting this will raise or lower the level of your media. This means that however you adjust volume with that control is how it will end up being exported when a video is finished and exported. So, yes, in a manner of speaking this control will affect the audio itself directly. Without a decibel meter you have no way of directly knowing what is happening to your audio but with the meter in OBS now you can.

Hit play in Wevideo and watch the meter in OBS. The meters will rise up and down as the track’s loudness increases and decreases on its own. Now slide the track volume slider back and forth to see what happens on the OBS decibel meter. It will show levels going up and down as you adjust. Great, now you know Wevideo and OBS are communicating with each other properly. Park the WeVideo volume slider back at 100% which is where you want to park it when we first start checking audio. Next, we want to walk through checking audio and determining how to adjust it based on measuring its actual loudness level as we see on the OBS decibel meter.
Here is an example of what the OBS decibel meter will look like. This is a screen shot from a video recording session where the presenter was speaking. On the meter we can see that their voice was peaking at a little over -20 db and averaged about -15 and occasionally hitting about -11 db while they gave their presentation. So, is this too quiet or just fine? Do you want to raise their decibel level a little or leave it be? To decide, you need to know objectively what the actual levels are for a clip so you can decide.
If you decide, yeah, this presenter is a little too quiet on average. Then raise the volume up a little and watch the levels in OBS as you go. Try to adjust the track slider volume so on average, the talking lands between -12 and -6 decibels. A little over or under this range is okay but too many instances of getting too loud are less desirable than too many areas of quieter talking. So if you have to compromise, go with whatever gives you the least occurrence of peaking into the red. Whatever you decide, the OBS decibel monitor gives you the tools to observe levels and make a more informed decision.
Using the meter to monitor and adjust your Wevideo audio – Music check
Music can add so much to your projects and you’ll need to make sure it also is not too loud and blends well with everything else. Most pre-recorded music you get from a stock or royalty free source is most often going to be much stronger than human speech. This means music is often too loud straight away. This is pretty normal and you’ll almost always need to adjust music levels from their original levels. There are some rules of thumb when working with music. If music is played alone with no other audio, it should be no louder than about -6 decibels on average just like our guideline for human speech. If music is played at the same time as talking to add “background music” then it naturally has to be quieter than talking to not overpower it. A value of about – 30 or -35 deciles is a rough sweet spot for music. It will depend on the music and the dialogue of course but start there, play both dialogue and music at the same time while finely adjusting the track volume slider on our music to get the right mix.


